Datalogic-scanning C-BOX 200 Instrukcja Użytkownika Pobierz pdf (Strona 21)

INSTALLATION

They are used together and they have the following significance:

when a jumper is in the J1 position (see Figure above) pin 40 is connected to pin 27

(EXT TRIG+); a jumper in J2 position connects pin 20 to pin 28 (EXT TRIG-).

If the jumpers are removed pin 20 and pin 40 are disconnected.

2.5 9-PIN INTERNAL CONNECTOR

The scanner auxiliary serial interface available on the internal 9-pin connector can be

used either for configuration through WinHost or for data monitoring.

The details of the connector pins are indicated in the following table:

Figure 14 - 9-pin male connector

9-pin connector pinout

Pin Name Function

1 N.C.

2 RXA Auxiliary RS232

3 TXA Auxiliary RS232

4 N.C.

5 SGND Signal Ground

6 N.C.

9 N.C.

DS2100A - DS2400A

7 CTSA Auxiliary Handshake RS232

8 RTSA Auxiliary Handshake RS232

DS4600A

7 SGND AUX Auxiliary Signal Ground

8 GND Ground

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Brak uwag

Datalogic-scanning C-BOX 200 Instrukcja Użytkownika Strona 21